Stamp Pad Inks

Special features

  1. Ink gives sharp impression on paper
  2. Ink gives large no. of impression without drying
  3. Very less penetration through paper
  4. Does not react with the body / Foam of the stamp

Component - Materials

  1. Ink gives sharp impression on paper
  2. Ink gives large no. of impression without drying
  3. Very less penetration through paper
  4. Does not react with the body / Foam of the stamp

Physical Properties: Basic Colours

PropertiesBlackBlueRedGreenViolet
Brookfield Viscosity at 25°C, 60 rpm by 61 LV Spindle (cps)20.418.619.219.716
Surface Tension (d/cm)2625252525
Specific Gravity (g/cm³)1.161.151.161.151.165
Sour Alkalinity (pH)8.756.627.45.294.3
Stamp drying time on Paper< 5 sec< 5 sec< 5 sec< 5 sec< 5 sec
Impression on PaperSharpSharpSharpSharpSharp
Ink SpreadingNilNilNilNilNil
Penetration through PaperLessLessLessLessLess
Shade on PaperBrightBrightBrightBrightBright

Special Colours Available

Certifications

Available Packaging

Shelf Life And Storage Instructions

Shelf Life :

Minimum 2 years when stored in original, tightly sealed containers under proper conditions.

Storage Instructions :

  1. Store in a cool, dry place (ideally between 15°C – 30°C)
  2. Keep containers tightly closed when not use to prevent evaporation or contamination.
  3. Avoid direct sunlight and heat sources to maintain ink quality.
  4. Keep away from open flames, as ink may contain flammable solvents.
  5. Store ink bottles upright to prevent leakage or clogging.
  6. Do not store below 5°C to avoid thickening or separation. If freezed below 5°C, thicking or high viscosity can be reduced by allowing ink to come at room temp. for best performance.

Ink Compatibility

  1. Compatible with standard paper surfaces for clear, sharp impressions.
  2. Suitable for use with traditional rubber stamps and polymer stamp dies.
  3. Designed for use in polypropylene (PP) stamp pad casing (top and bottom).
  4. Ideal for office documents, official seals, forms and daily paper stamping tasks.
  5. Works well with foam or felt pads without reacting or degrading materials.
  6. Not recommended for non-porous surfaces like glass, plastic, metal or coated boards.
  7. Avoid use on glossy, laminated or ceramic surfaces- ink may not adhere or may smear.
  8. Always test on specialty or treated paper types before regular use to ensure desired results.

Application Photos